جهاز ستيريو متكامل مارانتز PM8005 Ampدليل مستخدم مكبر الصوت

مقدمة

This manual provides detailed instructions for the setup, operation, and maintenance of your Marantz PM8005 Integrated Stereo Ampيرجى قراءة هذا الدليل بعناية قبل استخدام amplifier to ensure proper and safe operation. Keep this manual for future reference.

يثبت

1. فك التعبئة والتركيب

قم بإزالة amplifier from its packaging. Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight. Ensure there is sufficient space around the unit for proper airflow.

2. توصيل مكبرات الصوت

The PM8005 supports two pairs of speakers (A and B) and bi-wiring. Connect your speakers to the appropriate terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier is designed for speakers with an impedance of 4-16 ohms.

• For Speaker A or B only: 4-16 ohms.
• For Speaker A and B simultaneously: 8-16 ohms.

3. توصيل مصادر الصوت

Connect your audio source components (e.g., CD player, network player, tuner, recorder, turntable) to the corresponding input jacks on the rear panel. Use high-quality RCA cables for optimal audio performance.

• مدخل الفونو: Connect your turntable to the PHONO input. Ensure the ground wire from your turntable is connected to the SIGNAL GND terminal on the ampمكبر صوت لتقليل الطنين.
• CD, NETWORK, AUX, TUNER, RECORDER Inputs: Connect other audio devices to these analog RCA inputs.
• قوة AMP DIRECT IN: This input allows the PM8005 to function as a power amplifier, bypassing its pre-amplifier section. Useful for integration into a home theater system.
• ما قبل الخروج: These outputs allow you to connect an external power ampمُضخم الصوت أو مُضخم الصوت الفرعي.

4. توصيل الطاقة

After all audio connections are made, connect the supplied power cord to the AC IN terminal on the rear panel and then to a suitable wall outlet. The unit operates on 120V AC, 60Hz.

صورة: Rear panel of the Marantz PM8005 Integrated Stereo Ampمكبر. هذه view displays the various audio input and output connections, including PHONO, CD, NETWORK, AUX, TUNER, RECORDER, PRE OUT, and POWER AMP DIRECT IN. Speaker terminals for A and B are clearly visible, along with the AC IN power input and remote control jacks. The model number PM8005 and power specifications (120V~60Hz, 220W) are also indicated.

تعليمات التشغيل

1. تشغيل/إيقاف التشغيل

اضغط على زر الطاقة الموجود على اللوحة الأمامية لتشغيل الجهاز ampتشغيل أو إيقاف تشغيل المضخّة. سيضيء مؤشر الطاقة عند تشغيل الوحدة.

2. اختيار المدخلات

Use the input selector knob or buttons on the front panel (or remote control) to choose the desired audio source (e.g., CD, PHONO, NETWORK).

3. ضبط مستوى الصوت

Rotate the large VOLUME knob on the front panel to adjust the sound level. Start with a low volume and gradually increase it to a comfortable listening level.

4. ضوابط النغمة

The PM8005 features BASS, MID, and TREBLE tone controls to adjust the sound characteristics to your preference and room acoustics. The "Source Direct" button bypasses these tone controls for the purest audio signal.

5. Speaker Selection

Use the SPEAKER A/B buttons on the front panel to select which pair of speakers (A, B, or A+B) you wish to use.

صيانة

To ensure long-lasting performance and appearance of your Marantz PM8005, follow these maintenance guidelines:

• تنظيف: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or chemical cloths, as these may damage the finish.
• تهوية: تأكد من أن فتحات التهوية الموجودة في الجزء العلوي والجوانب من amplifier are not blocked. Proper airflow is crucial to prevent overheating.
• تراب: Periodically dust the unit to prevent dust buildup, which can affect performance and lead to overheating.
• الاتصالات: Occasionally check all cable connections to ensure they are secure. Loose connections can lead to poor sound quality or intermittent issues.

استكشاف الأخطاء وإصلاحها

If you experience issues with your Marantz PM8005, refer to the following common problems and solutions:

تحديد

Detailed technical specifications for the Marantz PM8005 Integrated Stereo Ampمكبر:

Note: Some specifications, such as HDMI connectivity and surround sound channels, may refer to general product family features or control capabilities rather than direct audio processing for this specific stereo integrated amplifier. The PM8005 is primarily a 2-channel stereo ampمكبر.

معلومات الضمان

Marantz products are manufactured to the highest quality standards. This product is covered by a limited warranty. The specific terms and conditions of the warranty may vary by region and retailer. Please refer to the warranty card included with your product or contact your local Marantz dealer for detailed information regarding warranty coverage, duration, and service procedures.

احتفظ بإثبات الشراء (الإيصال) لأنه سيكون مطلوبًا لأي مطالبات ضمان.

الدعم والاتصال

For further assistance, technical support, or service inquiries regarding your Marantz PM8005 Integrated Stereo Amplifier, please contact Marantz customer support or visit the official Marantz webموقع.

• الدعم عبر الإنترنت: يزور www.marantz.com/en-us/support for FAQs, product registration, and service information.
• الموزع المحلي: Your authorized Marantz dealer can provide local support and service.