مقدمة
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
معلومات السلامة
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
محتويات الحزمة
تأكد من وجود كافة المكونات قبل البدء في التثبيت:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- آلية المزلاج
- Strike plate (ASA Strike)
- مسامير التثبيت
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
الإعداد والتثبيت
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. تجهيز الباب
Ensure your door is prepared with the following standard dimensions:
- ثقب متقاطع: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- انتكاسة: 2-3 / 4 بوصة (70 مم)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- قم بتأمين المزلاج باستخدام البراغي المتوفرة.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. تثبيت لوحة الإضراب
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
تعليمات التشغيل
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
ملحوظة: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
صيانة
Regular maintenance ensures the longevity and smooth operation of your lock.
- تنظيف: نظف الأسطح الخارجية بقطعة قماش ناعمة.amp قطعة قماش. تجنب استخدام المنظفات الكاشطة أو المذيبات، لأنها قد تتلف الطبقة النهائية.
- تشحيم: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- تقتيش: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الرافعة صلبة أو يصعب تدويرها. | تراكم الأوساخ أو نقص التشحيم. | Clean the mechanism and apply graphite lubricant. |
| لا ينكمش مزلاج القفل بالكامل. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | 129002 |
| مسلسل | سلسلة 2500 |
| نوع القفل | Cylindrical Passage Lock (Non-locking) |
| مادة | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| ينهي | الكروم الساتان |
| نمط الرافعة | Withnell |
| انتكاسة | 2-3 / 4 بوصة (70 مم) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| اتجاه اليد | غير اليد |
| درجة | Grade 2 (Standard Duty Commercial) |
| لوحة الإضراب | إضراب ASA |
| المكونات المضمنة | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
معلومات الضمان
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
دعم العملاء
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webموقع: Visit the official Hager webموقع للحصول على موارد الدعم ومعلومات الاتصال.
- اتصال: Refer to the packaging or Hager's webموقع مخصص لأرقام الهواتف أو عناوين البريد الإلكتروني.
When contacting support, please have your model number (129002) and purchase details available.