Millennium Lighting RWHC14-SR

دليل تعليمات تركيب مصباح معلق أحادي الإضاءة من طراز Millennium RWHC14-SR

Model: RWHC14-SR | Brand: Millennium Lighting

مقدمة

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium RWHC14-SR Restoration One Light Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Millennium RWHC14-SR Restoration One Light Pendant in Bronze/Dark finish

Image 1: The Millennium RWHC14-SR Restoration One Light Pendant, showcasing its Bronze/Dark finish and classic design.

معلومات هامة حول السلامة

تحذير: يمكن أن يعرضك هذا المنتج للمواد الكيميائية بما في ذلك الرصاص ، المعروف في ولاية كاليفورنيا أنه يسبب السرطان والعيوب الخلقية أو غيرها من الأضرار التناسلية. لمزيد من المعلومات انتقل إلى www.P65Warnings.ca.gov.

  • Always turn off the main power supply at the circuit breaker before installation, removal, or servicing.
  • إذا لم تكن متأكدًا من عملية التثبيت، استشر كهربائيًا مؤهلًا.
  • تأكد من أن جميع التوصيلات الكهربائية تتم وفقًا للقوانين واللوائح المحلية.
  • لا تتجاوز الحد الأقصى للواطtagتم تحديده لتركيبات الإضاءة.
  • This fixture is rated for Damp المواقع. لا تقم بالتركيب في المناطق المعرضة للماء بشكل مباشر.
  • تعامل مع مكونات الزجاج بعناية لمنع الكسر.

محتويات الحزمة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

  • One Light Pendant Fixture (Model RWHC14-SR)
  • مجموعة أدوات التثبيت
  • دليل التعليمات

Note: Light bulb is typically not included and must be purchased separately.

تحديد

ميزةالتفاصيل
ماركةالألفية للإضاءة
رقم الموديلRWHC14-SR
أبعاد المنتج14 بوصة طول × 14 بوصة عرض × 8.25 بوصة ارتفاع
مادةزجاج ، معدن
ينهيبرونزي/داكن
شكل تركيبات الإضاءةقلادة
نوع مصدر الضوءLED (متوافق)
قاعدة المصباحE26 متوسط
ماكس واتtage200 واط
المجلدtage120 فولت
تصنيف السلامةمُدرج في قائمة UL
تصنيف الموقعDamp
نوع التركيبCeiling Mount (Pendant)

الإعداد والتثبيت

الأدوات المطلوبة: Screwdriver, wire strippers, electrical tape, ladder, safety glasses.

  1. إيقاف تشغيل الطاقة: حدد موقع قاطع الدائرة الكهربائية الذي يتحكم في مكان تركيبات الإضاءة، ثم افصل التيار الكهربائي. تأكد من انقطاع التيار باستخدام جهاز قياس الفولتية.tagه اختبار.
  2. تحضير التركيب: Carefully unpack the fixture and identify all components. Attach the mounting bracket to the junction box in the ceiling using the provided screws. Ensure the bracket is securely fastened.
  3. وصلات الأسلاك:
    • قم بتوصيل أسود سلك من التركيبات إلى أسود السلك (الساخن) من صندوق الوصلات.
    • قم بتوصيل أبيض سلك من التركيبات إلى أبيض السلك (المحايد) من صندوق الوصلات.
    • قم بتوصيل أخضر or bare copper ground wire from the fixture to the ground wire from the junction box.
    • قم بتأمين جميع التوصيلات باستخدام صواميل الأسلاك والشريط الكهربائي.
  4. تركيبات التثبيت: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting bracket and secure it using the provided screws or nuts.
  5. تثبيت اللمبة: Screw an E26 medium base bulb (up to 200 watts) into the socket. Do not overtighten.
  6. اعادة الطاقة: أعد تشغيل التيار الكهربائي من قاطع الدائرة. اختبر وحدة الإضاءة.
Millennium RWHC14-SR pendant light installed in a dining setting

Image 2: The Millennium RWHC14-SR pendant light installed, demonstrating its aesthetic in a typical indoor setting.

تعليمات التشغيل

The Millennium RWHC14-SR pendant light is operated via a standard wall switch connected to the fixture's electrical circuit. Ensure the light bulb is correctly installed and the power supply is active.

  • تشغيل/إيقاف: Flip the wall switch to the "ON" position to illuminate the pendant. Flip to "OFF" to turn it off.
  • يعتم (اختياري): If connected to a compatible dimmer switch and using a dimmable bulb, you can adjust the light intensity using the dimmer control.

صيانة

تضمن الصيانة الدورية طول عمر مصباحك المعلق وأداءه الأمثل.

  • تنظيف:
    • احرص دائمًا على فصل التيار الكهربائي من قاطع الدائرة قبل التنظيف.
    • امسح التركيبات بقطعة قماش ناعمة وجافة.
    • لا تستخدم المنظفات الكاشطة أو المذيبات أو المواد الملمعة لأنها قد تؤدي إلى إتلاف الطبقة النهائية.
    • For glass components, use a mild glass cleaner applied to a cloth, not directly to the fixture.
  • استبدال المصباح:
    • Ensure power is off and the bulb has cooled completely.
    • قم بفك المصباح القديم عكس اتجاه عقارب الساعة.
    • Screw in a new E26 medium base bulb (up to 200 watts) clockwise until snug.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
الضوء لا يعمل.
  • تم قطع الطاقة عند القاطع.
  • توصيلات الأسلاك فضفاضة.
  • لمبة معيبة.
  • مفتاح الحائط معيب.
  • فحص وإعادة ضبط قاطع الدائرة.
  • Turn off power, check wire connections, and re-secure.
  • استبدل المصباح بآخر جديد.
  • Consult an electrician to inspect the switch.
وميض الضوء.
  • لمبة فضفاضة.
  • نوع المصباح غير صحيح للخافت.
  • توصيلات الأسلاك فضفاضة.
  • شد المصباح.
  • تأكد من استخدام المصابيح القابلة للتعتيم مع مفاتيح التعتيم.
  • Turn off power, check wire connections, and re-secure.
تهتز التركيبات.
  • مفتاح باهت غير متوافق.
  • مكونات فضفاضة.
  • Replace dimmer with one compatible with LED or specific bulb type.
  • Turn off power, check for any loose parts and tighten.

الضمان والدعم

معلومات الضمان: The product is covered by a manufacturer's warranty. Specific details regarding the duration and terms of the warranty are typically provided with the product packaging or can be obtained by contacting Millennium Lighting directly. The provided information states "Warranty Description: Na.", indicating specific details are not readily available in this context.

دعم العملاء: For technical assistance, missing parts, or warranty claims, please contact Millennium Lighting customer service. Refer to the product packaging or the official Millennium Lighting webالموقع للحصول على معلومات الاتصال الحالية.

© 2023 Millennium Lighting. All rights reserved.

This manual is for informational purposes only. Millennium Lighting reserves the right to make changes to products without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.