1. انتهى المنتجview
The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.
Figure 1: RAB Lighting FFLED39 Future Flood LED Light
المميزات الرئيسية:
- قوة: 39-watt LED
- درجة حرارة اللون: 5100 كيلو أبيض بارد
- عمر: 100,000 hours based on LM-80 tests
- المصابيح: Three multi-chip 13-watt high-performance LEDs
- البصريات: NEMA type 7H x 6V with Air-flow technology heatsink
- العاكس: Semi-specular anodized aluminum
- جوانات: سيليكون عالي الحرارة
- ينهي: Bronze chip and fade-resistant polyester powder coat
- المجلدtage: 120-volt to 277-volt operation
2. معلومات السلامة
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- السلامة الكهربائية: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
- التأريض: The fixture must be properly grounded to prevent potential electric shock.
- التركيب: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
- درجة حرارة التشغيل: Do not operate the fixture outside its specified temperature range.
- المصابيح: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.
3. التثبيت
This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.
الأدوات المطلوبة:
- مفك براغي (فيليبس ورأس مسطح)
- تقشير الأسلاك
- كماشة
- Drill (if mounting surface requires pilot holes)
- مفتاح قابل للتعديل
خيارات التركيب:
The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.
الشكل 2: مثالample of a Slipfitter Mount (optional accessory)
خطوات التثبيت:
- فصل الطاقة: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagه اختبار.
- إعداد سطح التركيب: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
- وصلات الأسلاك:
- Connect the black wire from the fixture to the hot (L) wire from the power supply.
- Connect the white wire from the fixture to the neutral (N) wire from the power supply.
- Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
- Use appropriate wire connectors and ensure all connections are secure.
- تركيبات التثبيت: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
- ضبط الهدف: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
- اعادة الطاقة: Turn on power at the circuit breaker. Test the fixture for proper operation.
4. التشغيل
The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).
العملية القياسية:
- Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
- Ensure the power source is within the specified 120-277V range.
Photocell Control (Optional):
If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.
الشكل 3: مثالample of a Photocell (optional accessory)
5. الصيانة
The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.
تنظيف:
- الخارج: نظف الجزء الخارجي من الجهاز بشكل دوري بقطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الأوساخ والغبار والشوائب. لا تستخدم المنظفات الكاشطة أو المذيبات.
- عدسة: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.
تقتيش:
- Periodically inspect the fixture for any signs of damage, loose connections, or wear.
- تأكد من أن جميع أدوات التثبيت تبقى محكمة وآمنة.
- If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.
6. استكشاف الأخطاء وإصلاحها
If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يضيء |
|
|
| يومض الضوء أو يخفت |
|
|
| يبقى الضوء مضاءً خلال النهار |
|
|
If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.
7. المواصفات
Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:
| مواصفة | قيمة |
|---|---|
| رقم الموديل | FFLED39 |
| ماركة | إضاءة RAB |
| واتtage | 39 واط |
| المجلدtage | 120-277 Volts |
| مصدر الضوء | قاد |
| لون فاتح | الأبيض البارد |
| درجة حرارة اللون | 5100 كلفن |
| سطوع | 15000 لومن |
| الاستخدام الداخلي والخارجي | في الهواء الطلق |
| نوع التركيب | حامل الحائط |
| مادة | الألومنيوم والبلاستيك |
| نوع التشطيب | برونزي |
| أبعاد العنصر (الطول × العرض × الارتفاع) | 11 بوصة طول × 7.5 بوصة عرض × 10 بوصة ارتفاع |
| وزن العنصر | 10.23 رطل |
| مستوى مقاومة الماء | مقاوم للماء |
| عمر | 100,000 ساعات |
Figure 4: Indication of 100,000-hour LED lifespan
8. الضمان والدعم
ضمان الشركة المصنعة:
The RAB Lighting FFLED39 Future Flood LED Light is covered by a ضمان الشركة المصنعة لمدة عامين من تاريخ الشراء. يغطي هذا الضمان عيوب المواد والتصنيع في ظل الاستخدام والصيانة العاديين.
The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.
دعم العملاء:
For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webالموقع للحصول على تفاصيل الاتصال الحالية.