Interlink Torino Office Chair Instruction Manual

1. المقدمة

Thank you for choosing the Interlink Torino Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before assembly and retain them for future reference.

The Torino office chair is designed for comfort and functionality in a home or professional office environment. It features an anatomically shaped seat, an ergonomically designed backrest, and durable PVC and mesh materials for sustained use.

Image 1.1: The Interlink Torino Office Chair in a typical office environment.

2. معلومات السلامة

• أقصى سعة للوزن: This chair is designed to support a maximum weight of 90 kg (approximately 198 lbs). Do not exceed this limit to prevent damage or injury.
• حَشد: Assemble the chair on a soft, clean surface to prevent scratching. Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten fasteners.
• الاستخدام: Use the chair only for its intended purpose. Avoid standing on the chair or using it as a step stool.
• أطفال: Keep small parts away from children during assembly. This chair is intended for adult use.
• استقرار: Do not lean excessively to one side or the back to avoid tipping.

3. محتويات العبوة

Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• 1x Seat Base
• 1x مسند الظهر
• 1x Gas Lift Cylinder
• 1x Star Base (with 5 arms)
• 5x Caster Wheels
• 2x مساند للذراعين
• 1x Mechanism Plate (under seat)
• مجموعة الأجهزة (البراغي، الغسالات، مفتاح ألين)
• تعليمات التجميع (هذه الوثيقة)

4. تعليمات التجميع

Assembly requires approximately 30-60 minutes. It is recommended to have two people for easier assembly, though one person can complete it.

1. قم بتثبيت العجلات على القاعدة النجمية: Insert each of the five caster wheels into the holes at the end of the star base arms. Push firmly until they click into place.
2. أدخل أسطوانة رفع الغاز: قم بوضع أسطوانة رفع الغاز في الفتحة المركزية لقاعدة النجمة المجمعة.
3. قم بتثبيت لوحة الآلية على المقعد: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the lever is positioned correctly (usually on the right side when seated). Secure with screws provided in the hardware pack.
4. قم بتثبيت مساند الذراعين على المقعد ومسند الظهر: Secure the armrests to the sides of the seat cushion and the backrest using the provided screws. Do not overtighten initially; tighten fully once all screws are in place.
5. Connect Seat/Backrest Assembly to Gas Lift: ضع المقعد ومسند الظهر المُجمّعين بعناية على أسطوانة رفع الغاز، مع التأكد من محاذاة الفتحة المركزية للوحة الآلية مع الجزء العلوي من رافعة الغاز. اضغط بقوة لتثبيتهما.

Image 4.1: Dimensional diagram of the assembled chair.

5. تعليمات التشغيل

5.1. ضبط الارتفاع

To adjust the seat height (range: 46-55 cm):

• لرفع المقعد: While seated, lift the lever located on the right side of the chair (Image 5.1). The seat will rise automatically. Release the lever at the desired height.
• لخفض المقعد: While seated, lift the lever (Image 5.1) and apply slight body weight. The seat will lower. Release the lever at the desired height.
• To raise the seat without weight: انهض وارفع الرافعة. سيرتفع المقعد إلى أقصى ارتفاع له.

الصورة 5.1: آلية ضبط الارتفاع.

5.2. وظيفة الإمالة والقفل

The chair features a tilt mechanism that allows the backrest and seat to recline together. The lever on the right side (Image 5.2) also controls the tilt lock.

• لفتح خاصية الإمالة: Pull the lever outwards from the chair. The chair will now allow for a rocking motion.
• لقفل الإمالة: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image 5.2: Tilt lock and height adjustment lever.

5.3. الحركة

The five caster wheels allow for easy movement across hard floor surfaces. Ensure the floor is clear of obstructions before moving the chair.

6. الصيانة

• تنظيف: امسح بالإعلانamp cloth. For stubborn stains on PVC or mesh, use a mild soap solution and dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
• المثبتات: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• عجلات: Keep the caster wheels free of hair, dust, and debris to ensure smooth movement.
• العناية بالمواد: The chair features durable PVC and mesh materials. Avoid prolonged exposure to direct sunlight to prevent fading or material degradation.

Image 6.1: Detail of PVC and mesh materials.

Image 6.2: Close-up of the mesh backrest and PVC headrest.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

For warranty information, please refer to the purchase documentation or contact your retailer. If you require technical support, have questions about assembly, or need replacement parts, please contact Interlink customer service through their official webالموقع أو بائع التجزئة الذي تم شراء المنتج منه.