مقدمة
Thank you for choosing the QFX S15 Universal PA Tripod Speaker Stand. This stand is designed to provide stable and adjustable support for your PA speakers, enhancing sound projection and optimizing your audio setup. Constructed from aluminum, it offers durability and portability. Please read this manual thoroughly before assembly and use to ensure proper operation and safety.
Image: The QFX S15 Universal PA Tripod Speaker Stand, shown fully extended with its black finish and sturdy tripod base.
معلومات السلامة
To prevent injury or damage to your equipment, observe the following safety precautions:
- قدرة التحميل: Do not exceed the maximum load capacity of 80 lbs (36.2 kg). Overloading can cause instability and collapse.
- سطح مستقر: Always place the stand on a flat, level, and stable surface. Uneven surfaces can lead to tipping.
- تباعد الساقين: Ensure the tripod legs are fully extended and locked into position to maximize stability.
- تركيب السماعات: Securely mount the speaker onto the stand's pole. Ensure it is centered and balanced.
- التعديلات: Make height adjustments carefully. Always loosen adjustment knobs before moving the pole and tighten them securely afterward.
- العوائق: Keep the area around the stand clear to prevent accidental bumps or trips.
- الأطفال والحيوانات الأليفة: Keep children and pets away from the stand, especially during setup and adjustment.
- تقتيش: افحص الحامل بانتظام للتأكد من خلوه من أي علامات تآكل أو تلف أو أجزاء مفكوكة. لا تستخدمه إذا كان تالفاً.
محتويات الحزمة
تأكد من وجود جميع المكونات في العبوة:
- 1 x QFX S15 Universal PA Tripod Speaker Stand
If any parts are missing or damaged, please contact QFX customer support.
تعليمات الإعداد
Follow these steps to set up your QFX S15 Speaker Stand:
- افتح الساقين: Place the stand on a flat, stable surface. Gently pull the tripod legs outwards until they are fully extended and form a wide, stable base. Ensure the leg brace is locked into position.
- ضبط الارتفاع: Loosen the height adjustment knob located on the main pole. Carefully extend the inner pole to the desired height. Do not extend beyond the maximum height indicator (if present) or to a point where stability is compromised.
- ارتفاع آمن: Once the desired height is reached, firmly tighten the height adjustment knob to lock the inner pole in place. Ensure there is no wobble.
- جبل المتحدث: Carefully lift your PA speaker and align its mounting socket with the top pole of the stand. Lower the speaker onto the pole, ensuring it sits securely and is centered.
- التحقق النهائي: Gently shake the stand to confirm stability. If there is any instability, re-check all connections and adjustments.
تعليمات التشغيل
The QFX S15 stand is designed for straightforward operation:
- ضبط الارتفاع: To change the speaker height, first remove the speaker from the stand for safety. Loosen the height adjustment knob, set the pole to the new desired height, and then firmly re-tighten the knob. Re-mount the speaker.
- قابلية النقل: For transport or storage, remove the speaker, loosen the height adjustment knob to retract the inner pole, and then fold the tripod legs inwards. Secure any loose parts.
صيانة
تضمن الصيانة المناسبة طول عمر حامل السماعات وتشغيله الآمن:
- تنظيف: امسح الحامل بقطعة قماش ناعمة وجافة لإزالة الغبار والأوساخ. وللبقع المستعصية، استخدم قطعة قماش ناعمة قليلاً.amp اغسل بقطعة قماش وصابون لطيف، ثم جفف جيدًا. تجنب المنظفات أو المذيبات الكاشطة.
- تخزين: Store the stand in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure it is fully collapsed and secured to prevent accidental unfolding.
- تقتيش: Periodically check all bolts, screws, and adjustment knobs for tightness. Inspect the aluminum tubing and plastic components for any cracks, bends, or damage. Replace any worn or damaged parts immediately.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your speaker stand, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الحامل غير مستقر أو متذبذب. | Legs not fully extended or locked; uneven surface; adjustment knob loose; overloaded. | Ensure legs are fully spread and locked. Move to a flat, level surface. Tighten all adjustment knobs. Verify speaker weight does not exceed 80 lbs. |
| صعوبة تعديل الارتفاع. | Adjustment knob too tight; inner pole stuck. | Loosen the adjustment knob completely. Apply gentle, even pressure to the pole. Ensure no debris is obstructing movement. |
| Speaker does not sit securely on the pole. | Speaker mounting socket is not compatible or damaged; speaker not centered. | Ensure your speaker has a standard 35mm pole mount. Center the speaker carefully. If the socket is damaged, do not use the stand. |
If the problem persists, contact QFX customer support.
تحديد
| ماركة | كيو اف اكس |
| رقم الموديل | س-15 |
| مادة | Aluminum construction (main frame), Plastic (connectors/knobs) |
| لون | أسود |
| ارتفاع قابل للتعديل | 46 بوصة إلى 72 بوصة (116.8 سم إلى 182.9 سم) |
| سعة التحميل | 80 رطل (36.2 كجم) |
| قطر القطب | 1.38 بوصة (35 ملم) |
| وزن العنصر | 5.15 رطل (2.34 كجم) |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 72 بوصة طول × 1.38 بوصة عرض × 72 بوصة ارتفاع (عند الفتح الكامل) |
| نوع الملاءمة | ملاءمة عالمية |
| رمز المنتج الموحد | 606540012208 |
الضمان والدعم
ضمان: The QFX S15 Speaker Stand comes with a ضمان الشركة المصنعة لمدة عامين from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the stated load capacity.
دعم العملاء: For technical assistance, warranty claims, or to inquire about replacement parts, please visit the official QFX webيمكنك زيارة الموقع الإلكتروني أو الاتصال بقسم خدمة العملاء. راجع وثائق الشراء الخاصة بك للحصول على تفاصيل الاتصال المحددة.
الموارد المتاحة على الإنترنت: للحصول على معلومات إضافية وتحديثات المنتج، تفضل بزيارة متجر QFX على أمازون.