Bernstein Design 1521 Freestanding Bathtub Faucet Instruction Manual

1. انتهى المنتجview

The Bernstein Design 1521 is a high-quality freestanding bathtub faucet designed for modern bathrooms. It features a sleek chrome finish and is constructed from durable brass. This faucet includes a single-lever mixer and an integrated hand shower for versatile use.

المميزات الرئيسية:

• مادة: Chromed brass for durability and aesthetic appeal.
• نطاق التشغيل: Suitable for water pressure from 0.5 bar to 8 bar, with a maximum temperature of 90°C.
• وزن: Approximately 5500 g, ensuring stability.
• الاتصالات: Standard DIN connectors for easy integration.
• دوش يدوي: Includes a 1.50 m shower hose (plastic with highly flexible metallic effect) and a square hand shower.
• خرطوشة: High-quality, replaceable ceramic cartridge for smooth operation and longevity.
• التوافق: Also suitable for gas water heaters.
• تثبيت: Designed for easy installation as a freestanding unit.

Image: The Bernstein Design 1521 freestanding bathtub faucet in operation, showing water flowing from the main spout and the attached hand shower.

2. تعليمات السلامة

• قم دائمًا بإغلاق مصدر المياه الرئيسي قبل محاولة أي عملية تركيب أو صيانة.
• تأكد من إحكام إغلاق جميع الوصلات بشكل صحيح لمنع التسرب.
• Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this can cause damage.
• إذا لم تكن متأكدًا من أي خطوات التثبيت، فاستشر سباكًا مؤهلًا.
• احتفظ بالأجزاء الصغيرة بعيدًا عن متناول الأطفال.
• Verify that the water pressure and temperature in your system are within the specified operating range (0.5-8 bar, max 90°C).

3. دليل التثبيت

This section provides general guidelines for installing the Bernstein Design 1521 freestanding bathtub faucet. Professional installation is recommended.

3.1. التفريغ والتفتيش

• Carefully unpack all components and check for any damage during transit.
• تأكد من وجود جميع الأجزاء المدرجة في قائمة التعبئة.

Image: The faucet components are securely packaged in foam for protection during shipping.

3.2. مكونات أكثرview

Familiarize yourself with the various parts of the faucet before beginning installation.

Image: All parts of the faucet system, including the main column, spout, hand shower, flexible hoses, mounting plate, and fasteners.

3.3. خطوات ما قبل التثبيت

• قم بإغلاق مصدر المياه الرئيسي للحمام.
• Flush the water lines to remove any debris.
• Prepare the floor area where the faucet will be installed, ensuring it is clean and level.

3.4. تركيب الصنبور

1. Position the mounting base on the floor at the desired location. Mark the drilling points.
2. Drill holes according to the markings and insert appropriate anchors (if required for your flooring type).
3. Secure the mounting base to the floor using the provided screws.
4. Connect the hot and cold water supply lines to the flexible hoses extending from the faucet column. Ensure proper sealing with plumber's tape or thread sealant.
5. Carefully place the faucet column onto the mounting base, aligning the connections. Secure the faucet column to the base.
6. Attach the hand shower hose to the designated outlet on the faucet body.

Image: The complete freestanding faucet unit, illustrating its overall design and the 21 cm spout length.

3.5. الفحص بعد التثبيت

• قم بتشغيل مصدر المياه الرئيسي ببطء.
• افحص جميع الوصلات بحثًا عن أي تسريبات. قم بربط أي وصلات متسربة على الفور.
• Test the faucet and hand shower for proper water flow and temperature control.

4. تعليمات التشغيل

4.1. التحكم في تدفق المياه ودرجة حرارتها

The faucet features a single lever for controlling both water flow and temperature.

• To turn on the water, lift the lever.
• To increase water flow, lift the lever further.
• To adjust temperature, move the lever left for hot water and right for cold water.
• To turn off the water, push the lever down.

Image: Detail of the single lever handle for precise control of water flow and temperature.

4.2. Using the Hand Shower

• To activate the hand shower, pull the diverter knob located on the faucet body.
• Water will divert from the main spout to the hand shower.
• After use, push the diverter knob back in to return water flow to the main spout.

Image: The integrated square hand shower with its flexible hose, ready for use.

5. الصيانة والعناية

5.1. تنظيف الصنبور

• Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
• اشطفيه جيدًا بالماء النظيف وجففيه بقطعة قماش ناعمة لمنع بقع الماء.
• Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the chrome finish.

5.2. صيانة جهاز التهوية

Periodically unscrew the aerator at the end of the spout to clean out any mineral deposits or debris that may affect water flow.

Image: Detail of the faucet spout and aerator, which can be removed for cleaning.

5.3. خرطوشة السيراميك

The faucet is equipped with a high-quality, replaceable ceramic cartridge. If you experience persistent dripping or difficulty controlling water flow/temperature, the cartridge may need to be replaced. Consult a professional plumber for cartridge replacement.

6. استكشاف الأخطاء وإصلاحها

7. المواصفات

8. الضمان والدعم

Bernstein products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Bernstein website. For technical support or spare parts, please contact Bernstein customer service.

معلومات الاتصال:

• Webموقع: www.bernstein-badshop.de (General brand website, specific support link may vary)
• Refer to your purchase receipt or product packaging for direct customer service contacts.