9 Volt Metal Detector 6-inch Wand Scanner User Manual

مقدمة

This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.

Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.

معلومات السلامة

• Always operate the device in a safe manner.
• لا تعرض الجهاز لدرجات الحرارة القصوى أو الرطوبة.
• يحفظ بعيدًا عن متناول الأطفال.
• تخلص من البطاريات بالطريقة الصحيحة وفقًا للوائح المحلية.
• لا تحاول تعديل الجهاز أو إصلاحه بنفسك. استعن بفنيي صيانة مؤهلين.

محتويات الحزمة

• Cen-Tech 9 Volt Metal Detector Wand Scanner
• حقيبة التخزين
• دليل المستخدم (هذا المستند)

Note: A 9V battery is required for operation and is sold separately.

الإعداد: تركيب البطارية

The Cen-Tech Metal Detector requires one 9-volt battery for operation.

1. Locate the battery compartment cover, typically on the handle or rear of the device.
2. قم بسحب الغطاء أو فكه لفتح الحجرة.
3. Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
4. أعد تركيب غطاء حجرة البطارية بشكل آمن.
5. الآن أصبح الجهاز جاهزًا للاستخدام.

تعليمات التشغيل

تشغيل/إيقاف التشغيل

• To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
• To turn the detector عنحرك مفتاح الطاقة إلى وضع "إيقاف التشغيل".

Detecting Metal

• Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
• When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
• Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.

تقليل الحساسية

• The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
• Release the button to return to full sensitivity.

تنبيه انخفاض مستوى البطارية

• The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
• Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.

سمات

• Detects metal embedded in wood.
• May also be used as a security scan device.
• 6-inch wand for one-pass coverage.
• Audio alarm and LED visual alert.
• 50% sensitivity reduction button.
• تنبيه البطارية منخفضة.
• Comes with a handy carrying case.

صيانة

• تنظيف: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• تخزين: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• بطارية: Remove the battery if the device will not be used for an extended period to prevent leakage and damage.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.

For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.