مقدمة
This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your MIPRO MB-70 Replacement Rechargeable 12V Battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
معلومات هامة حول السلامة
يرجى دائمًا مراعاة احتياطات السلامة التالية لمنع الإصابة أو تلف البطارية والمعدات المتصلة بها:
- لا ماس كهربائى أطراف البطارية.
- لا expose the battery to extreme temperatures, direct sunlight, or fire.
- لا immerse the battery in water or other liquids.
- لا attempt to open, disassemble, or modify the battery.
- احتفظ بالبطارية بعيدًا عن متناول الأطفال والحيوانات الأليفة.
- تخلص من البطاريات الفارغة وفقًا للوائح المحلية.
- Use only chargers specified for 12V lead-acid batteries.
المنتج انتهىview
The MIPRO MB-70 is a high-quality, rechargeable 12V lead-acid battery designed as a replacement for compatible MIPRO audio equipment and other devices requiring a 12V power source. It provides reliable and consistent power for extended operation.

Image 1: The MIPRO MB-70 Replacement Rechargeable 12V Battery. This image shows the compact, rectangular form factor of the battery, typically black or dark gray, with visible terminals for connection.
تعليمات التثبيت
Follow these steps to safely install the MIPRO MB-70 battery into your compatible device:
- جهاز إيقاف التشغيل: Ensure the device requiring the battery replacement is completely powered off and disconnected from any power sources.
- تحديد مكان حجرة البطارية: Identify and open the battery compartment on your device. Refer to your device's manual for specific instructions.
- إزالة البطارية القديمة: Carefully disconnect the old battery, noting the polarity (positive and negative terminals). Remove the old battery from the compartment.
- أدخل بطارية جديدة: Insert the MIPRO MB-70 battery into the compartment, ensuring the terminals align correctly with the device's connectors. Connect the positive (+) terminal first, then the negative (-) terminal.
- حجرة آمنة: أغلق وتأمين حجرة البطارية.
- التهمة الاولية: It is recommended to fully charge the battery before its first use. Refer to the "Charging the Battery" section.
شحن البطارية
To ensure optimal performance and battery life, follow these charging guidelines:
- Use a compatible 12V lead-acid battery charger. Using an incorrect charger can damage the battery or pose a safety risk.
- Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative).
- قم بتوصيل الشاحن بمنفذ طاقة مناسب.
- Allow the battery to charge until the charger indicates a full charge (refer to your charger's instructions).
- Avoid overcharging, as this can reduce battery life. Disconnect the charger once the battery is fully charged.
- اشحن البطارية في مكان جيد التهوية.
صيانة وتخزين البطاريات
Proper maintenance and storage will extend the life of your MIPRO MB-70 battery:
- الشحن المنتظم: If the battery is not used for extended periods, recharge it every 3-6 months to prevent deep discharge, which can permanently damage lead-acid batteries.
- محطات نظيفة: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
- ظروف التخزين: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature is between 20°C and 25°C (68°F and 77°F).
- تجنب التفريغ العميق: Do not allow the battery to completely discharge. Recharge it as soon as possible after use.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| البطارية لا تشحن | Charger not connected properly; Faulty charger; Deeply discharged battery; Damaged battery. | Check charger connections; Try a different charger; Allow extended charging time for deeply discharged batteries (if applicable); Replace battery if damaged. |
| وقت تشغيل قصير بعد الشحن الكامل | Battery capacity degradation; Incomplete charge; High power consumption by device. | Ensure full charge cycle; Consider battery replacement if capacity is significantly reduced; Check device for abnormal power draw. |
| أطراف البطارية متآكلة | التعرض للرطوبة أو التخزين غير السليم. | Clean terminals with a dry cloth or a soft brush. Ensure proper storage conditions. |
إذا واجهت مشكلات غير مدرجة هنا أو إذا لم تنجح الحلول في حل المشكلة، فيرجى الاتصال بدعم العملاء.
تحديد
| ماركة | ميبرو |
| رقم الموديل | D5741 (MB-70) |
| المجلدtage | 12 فولت |
| تكوين خلية البطارية | حمض الرصاص |
| سعة البطارية | 4.5 Amp ساعات |
| وزن العنصر | 3 رطل (حوالي 1.36 كجم) |
| رمز المنتج الموحد | 806593457418 |
| أول تاريخ متاح | 14 نوفمبر 2012 |
الضمان والدعم
For warranty information and technical support, please refer to the documentation provided with your original MIPRO product or visit the official MIPRO webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.
For further assistance, you may contact the seller directly via the platform where the purchase was made.
فيديوهات المنتج
لا تتوفر فيديوهات رسمية للمنتجات للتضمين في الوقت الحالي.