Axxess Metra AX-ADCT2 80W Differential Converter Instruction Manual

1. المقدمة

The Axxess Metra AX-ADCT2 is a 2-channel differential converter designed to facilitate the integration of aftermarket audio components into a vehicle's factory sound system. This device allows for the connection of an aftermarket head unit to a factory amplifier or the addition of an aftermarket amplifier to a factory system, converting high-level speaker signals to low-level RCA outputs.

المميزات الرئيسية:

• 2-channel input for speaker-level signals
• 80-watt maximum input handling
• 6:1 step-down ratio with variable output adjustment
• Separate level adjustment for each channel (Left and Right)
• Gold-flashed RCA outputs for optimal signal transfer

Image 1.1: Axxess Metra AX-ADCT2 Differential Converter unit. This image shows the compact black housing of the converter with input and output connections clearly visible.

2. معلومات السلامة

يجب دائمًا مراعاة احتياطات السلامة التالية أثناء التثبيت والتشغيل:

• Disconnect the vehicle's battery negative terminal before beginning any electrical installation to prevent short circuits and damage.
• Ensure all wiring connections are secure and properly insulated to prevent electrical shorts.
• Do not exceed the maximum input wattage of 80 watts to avoid damaging the converter.
• Mount the converter in a location free from excessive heat, moisture, and vibration.
• استشر فنيًا متخصصًا في تركيب أنظمة الصوت في السيارة إذا لم تكن متأكدًا من أي جزء من عملية التثبيت.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• Axxess 2 Channel Differential Converter (AX-ADCT2)

4. الإعداد والتثبيت

The AX-ADCT2 converter allows you to add an aftermarket amplifier to a factory radio or integrate an aftermarket radio with a factory ampاتبع الخطوات التالية للتثبيت الصحيح:

مخطط الأسلاك انتهىview:

Image 4.1: Axxess Metra AX-ADCT2 with included wiring harness. This image displays the converter unit alongside its multi-colored wiring harness, illustrating the connections for power, ground, remote, and speaker inputs.

خطوات التثبيت:

1. تحديد أسلاك السماعات: Locate the factory speaker wires from the head unit or factory amplifier that you intend to use as the input for the AX-ADCT2. Typically, these are the rear speaker wires for subwoofer applications or front speaker wires for full-range ampالتصفية.
2. توصيل المدخلات عالية المستوى: Connect the factory speaker wires to the corresponding high-level input terminals on the AX-ADCT2. Ensure correct polarity (positive to positive, negative to negative) for each channel (Left and Right). The AX-ADCT2 features a 'Hi-IN' input section with 'L' and 'R' terminals.
3. توصيلات الطاقة والأرض:
   • قم بتوصيل أرضي wire (usually black) from the AX-ADCT2 harness to a clean, unpainted metal surface on the vehicle chassis.
   • قم بتوصيل 12V Constant Power wire (usually yellow) from the AX-ADCT2 harness to a constant 12V power source.
   • قم بتوصيل تشغيل عن بعد wire (usually blue) from the AX-ADCT2 harness to the remote turn-on output of your aftermarket head unit or to a switched 12V source that turns on with the ignition. This wire will provide the remote turn-on signal for your aftermarket ampمكبر.
4. توصيل مخرجات RCA: Connect RCA cables from the 'OUTPUT' jacks on the AX-ADCT2 to the RCA input jacks on your aftermarket ampمكبر.
5. Adjust Output Levels: The AX-ADCT2 features separate variable level adjustments for each channel. Use a small screwdriver to carefully adjust these potentiometers to match the input sensitivity of your aftermarket amplifier. Start with the levels at their minimum setting and gradually increase them until the desired output is achieved without distortion.
6. نظام اختبار: Reconnect the vehicle's battery. Turn on the audio system and test for proper functionality. Adjust the level controls on the AX-ADCT2 and your amplifier as needed to achieve balanced sound.

5. تعليمات التشغيل

Once properly installed, the AX-ADCT2 operates automatically. When the vehicle's audio system is turned on, the converter will activate, providing a low-level RCA signal to your aftermarket amplifier. The remote turn-on output will also activate, turning on the connected amplifier. The variable output controls allow you to fine-tune the signal level to prevent distortion and achieve optimal sound quality from your ampمكبر.

6. الصيانة

The AX-ADCT2 is designed for reliable, maintenance-free operation. However, periodic checks can ensure continued performance:

• فحص الاتصالات: Periodically check all wiring connections to ensure they remain secure and free from corrosion. Loose connections can lead to signal loss or intermittent operation.
• تنظيف الوحدة: If necessary, gently wipe the exterior of the converter with a dry, soft cloth to remove dust. Do not use liquid cleaners.
• الفحص البيئي: Ensure the mounting location remains free from excessive heat, moisture, or physical damage.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your AX-ADCT2, refer to the following troubleshooting guide:

8. المواصفات

9. الضمان والدعم

For warranty information or technical support, please refer to the official Axxess or Metra Electronics website, or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.