دليل استخدام جهاز قياس ضغط الدم Beurer BM60

1. المقدمة

Thank you for choosing the Beurer BM60 Upper Arm Blood Pressure Monitor. This device is designed for fully automatic, non-invasive measurement of arterial blood pressure and pulse rate on the upper arm. It features a patented resting indicator for precise results, a large LCD display, WHO classification, and arrhythmia detection. Please read this manual carefully before first use and keep it for future reference.

المميزات الرئيسية:

• Fully automatic blood pressure and pulse measurement on the upper arm.
• Patented resting indicator for accurate measurement results.
• شاشة LCD كبيرة الحجم وسهلة القراءة.
• WHO (World Health Organization) classification indicator.
• كشف عدم انتظام ضربات القلب.
• 2 user memory channels with 60 memory spaces each.
• Calculates average of all saved morning and evening measurements for the last 7 days.
• وظيفة الإغلاق التلقائي.
• Includes batteries and a storage bag.

2. معلومات السلامة

Please observe the following safety instructions to ensure safe and effective use of your blood pressure monitor:

• This device is intended for measuring human arterial blood pressure and pulse rate. It is not intended for use on children.
• Do not attempt to repair the device yourself. Any repairs must be performed by authorized service personnel.
• Consult your doctor before using the device if you have any medical conditions, especially if you have a pacemaker or other implanted devices.
• Do not use the device in areas with high electromagnetic fields, such as near mobile phones or microwave ovens, as this may affect accuracy.
• Measurements taken by yourself are for your information only. Do not alter the dosage of any medicines prescribed by your doctor based on self-measurements.
• Ensure the cuff is applied correctly and comfortably. Over-tightening can cause discomfort or injury.
• أبقِ الجهاز ومكوناته بعيداً عن متناول الأطفال.

3. انتهى المنتجview

The Beurer BM60 Blood Pressure Monitor consists of the main unit and an upper arm cuff. Familiarize yourself with the components:

Figure 1: Beurer BM60 Blood Pressure Monitor main unit.

Figure 2: The BM60 monitor connected to its upper arm cuff.

الشكل 3: الصورة عن قرب view of the M1, Power, and M2 buttons on the monitor.

Figure 4: The LCD display showing systolic, diastolic, pulse, and memory indicators.

4. الإعداد

4.1 تركيب البطارية

1. افتح غطاء حجرة البطارية الموجود في الجزء الخلفي من الجهاز.
2. Insert four (4) AA 1.5V batteries, ensuring correct polarity (+/-).
3. أغلق غطاء حجرة البطارية جيدًا.
4. سيظهر مؤشر انخفاض البطارية على الشاشة عندما تحتاج البطاريات إلى الاستبدال.

4.2 توصيل الكفة

1. Insert the air tube connector from the cuff firmly into the port on the left side of the monitor unit.
2. تأكد من أن الوصلة محكمة لمنع تسرب الهواء أثناء القياس.

4.3 تطبيق الكفة

The standard cuff is suitable for upper arm circumferences of 23-35 cm. An optional XL cuff (30-42 cm) is available separately.

1. Place the cuff on your bare upper left arm, approximately 2-3 cm above the elbow joint. The air tube should run along the inside of your arm.
2. Ensure the cuff is snug but not too tight. You should be able to fit two fingers under the cuff.
3. The arrow on the cuff should point towards your hand.

Figure 5: Correct placement of the cuff on the upper arm.

Figure 6: Detail of the cuff showing the arm circumference guide (22-32cm in this example, actual cuff is 23-35cm).

5. تعليمات التشغيل

5.1 قبل القياس

• استريح لمدة 5 دقائق على الأقل قبل إجراء القياس.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30 minutes prior to measurement.
• Sit in a relaxed position with your back supported and feet flat on the floor. Your arm should be resting on a table so the cuff is at heart level.
• التزم بالهدوء والثبات أثناء القياس.

5.2 أخذ القياس

1. اضغط على تشغيل/إيقاف زر (I) to start the measurement.
2. سينتفخ الكفة تلقائيًا، وسيبدأ القياس.
3. During the measurement, the device will display a patented resting indicator. This indicates whether your circulatory system is sufficiently at rest for an accurate reading.
4. Once the measurement is complete, the systolic pressure, diastolic pressure, and pulse rate will be displayed on the LCD screen.
5. The results will also be classified according to WHO guidelines and checked for arrhythmia.
6. The device automatically stores the measurement in the selected user memory (M1 or M2).
7. The device will automatically switch off after approximately one minute of inactivity.

5.3 وظائف الذاكرة

The BM60 has two user memory channels (M1 and M2), each capable of storing 60 measurements.

• Selecting a User: قبل بدء القياس، اضغط على M1 or M2 button to select the desired user profile.
• Viewing Stored Measurements: مع إيقاف تشغيل الجهاز، اضغط على M1 or M2 زر ل view the stored measurements for that user. Repeated presses will cycle through the readings.
• 7-Day Average: The device can display an average of all saved morning and evening readings taken over the last 7 days for each user. Refer to the full user manual for specific instructions on accessing this feature.

6. الصيانة

6.1 التنظيف

• Clean the monitor unit and cuff with a slightly damp قماش. لا تستخدم المنظفات الكاشطة أو تغمر الجهاز في الماء.
• لا تغسل الكفة.

6.2 التخزين

• قم بتخزين الجهاز في حقيبة التخزين المرفقة عند عدم استخدامه.
• قم بتخزين الجهاز في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• قم بإزالة البطاريات إذا كنت لن تستخدم الجهاز لفترة طويلة.

Figure 7: The cuff can be rolled up for compact storage in the included bag.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Beurer BM60, refer to the table below for common problems and solutions:

If the problem persists, contact Beurer customer support or your local service center.

8. المواصفات

9. الضمان والدعم

9.1 الضمان

The Beurer BM60 Blood Pressure Monitor comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 دعم العملاء

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Beurer customer support. Contact information can typically be found on the Beurer official webالموقع أو على عبوة المنتج.