ويستكلوكس 70014

Westclox Plasma LED Alarm Clock (Model 70014) Instruction Manual

مقدمة

This manual provides detailed instructions for the setup, operation, and maintenance of your Westclox Plasma LED Alarm Clock, Model 70014. Designed for convenience and functionality, this digital alarm clock features a clear LED display, USB-C charging, and a battery backup system. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.

Westclox Plasma LED Alarm Clock, front view showing red LED time display

الشكل 1: الجبهة view of the Westclox Plasma LED Alarm Clock.

الميزات الرئيسية

  • شاشة سهلة القراءة: Features large, bold red LED numbers for high visibility from a distance.
  • Loud Alarm with Snooze Function: Equipped with a loud alarm suitable for heavy sleepers and a convenient snooze button for temporary silence.
  • Customizable Brightness Settings: Offers three dimmer levels (Bright, Medium, Dim) to adjust display brightness for comfortable viewفي أي حالة الإضاءة.
  • منفذ شحن USB-C: Includes a built-in USB Type-C port for charging smartphones or other compatible devices.
  • البطارية النسخ الاحتياطي: Requires 1 AAA battery (not included) to retain time settings during power outagإِسْ
  • تصميم عصري ومدمج: Sleek black case designed to blend seamlessly with various room decors.

يثبت

1. توصيل الطاقة

  1. Connect the included USB-C cable to the "POWER IN" port on the back of the alarm clock.
  2. Plug the other end of the USB-C cable into a compatible USB power adapter (not included) and then into a wall outlet. The display will illuminate.

2. Battery Installation (for Backup)

  1. حدد مكان حجرة البطارية في الجانب السفلي من الساعة.
  2. Open the compartment and insert 1 AAA battery (not included), ensuring correct polarity (+/-).
  3. Close the battery compartment. This battery will maintain time settings during power interruptions.
خلف view of the Westclox Plasma LED Alarm Clock showing control buttons and USB ports

الشكل 2: خلفي view with control buttons and USB ports.

تعليمات التشغيل

1. ضبط الوقت

  1. Press and hold the "TIME SET" button (located on the back or top, refer to Figure 2). The hour digits will begin to flash.
  2. Use the "HOUR" button to adjust the hour. Pay attention to the PM indicator light.
  3. Press the "TIME SET" button again. The minute digits will flash.
  4. استخدم زر "الدقائق" لضبط الدقائق.
  5. Press the "TIME SET" button one more time to confirm and exit time setting mode.

2. ضبط المنبه

  1. Press and hold the "ALARM SET" button (located on the back or top, refer to Figure 2). The alarm hour digits will begin to flash.
  2. Use the "HOUR" button to adjust the alarm hour. Ensure the correct AM/PM is selected.
  3. Press the "ALARM SET" button again. The alarm minute digits will flash.
  4. Use the "MINUTE" button to adjust the alarm minutes.
  5. Press the "ALARM SET" button one more time to confirm and exit alarm setting mode.
  6. To activate the alarm, slide the "ALARM ON/OFF" switch to the "ON" position. An alarm indicator light will appear on the display.

3. وظيفة الغفوة

When the alarm sounds, press the large "SNOOZE" button on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.

قمة view of the Westclox Plasma LED Alarm Clock showing the large snooze button

الشكل 3: الجزء العلوي view highlighting the Snooze button.

4. مُخفِّض إضاءة الشاشة

The clock features three display brightness levels: Bright, Medium, and Dim. To adjust the brightness, locate the "DIMMER" switch or button (refer to Figure 2) and cycle through the options until your desired brightness is achieved.

5. شحن USB

The clock includes a USB Type-C "CHARGE OUT" port. Connect your smartphone or other compatible device to this port using its charging cable to utilize the clock as a charging station.

Westclox Plasma LED Alarm Clock charging a smartphone via its USB-C port

Figure 4: USB-C charging port in use.

Video 1: Official product video demonstrating Westclox LED Alarm Clock features.

صيانة

  • تنظيف: Use a soft, dry cloth to clean the exterior of the clock. Avoid abrasive cleaners or solvents.
  • استبدال البطارية: Replace the AAA backup battery annually or if you notice time discrepancies during power outagإِسْ
  • تخزين: في حال تخزين الساعة لفترة طويلة، قم بإزالة البطارية الاحتياطية لمنع التسرب.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
العرض فارغلا حول ولا قوة outage.Ensure USB-C cable is securely connected to a working power adapter and outlet. Check if backup battery is installed and functional.
لا يصدر صوت التنبيهلم يتم تفعيل التنبيه أو تم ضبطه بشكل غير صحيح.Verify the "ALARM ON/OFF" switch is in the "ON" position. Re-check alarm time settings.
الشاشة ساطعة/خافتة للغايةإعدادات التعتيم غير صحيحة.Adjust the "DIMMER" switch/button to cycle through brightness levels.
الوقت غير صحيح بعد انقطاع الطاقةtageالبطارية الاحتياطية مفقودة أو فارغة.Install a fresh AAA battery for backup. Reset the time if necessary.

تحديد

ميزةالتفاصيل
ماركةوستكلوكس
رقم الموديل70014
لونأسود
نوع العرضشاشة LED رقمية (حمراء)
حجم العرض0.9-Inch (digit height)
مصدر الطاقةElectrical (USB-C cable included, adapter not included)
النسخ الاحتياطي للبطاريةبطارية 1 AAA (غير مدرجة)
المميزات الخاصةAlarm, Snooze, 3-Level Dimmer, USB-C Charge Out Port
مادةبلاستيك
وزن العنصر7.84 أونصات
نوع التركيبسطح الطاولة

الضمان والدعم

This Westclox Plasma LED Alarm Clock comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in the product packaging or visit the official Westclox webالموقع. احتفظ بإيصال الشراء كإثبات للشراء.

For additional information or assistance, you may visit the Westclox Store on Amazon.

© 2025 Westclox. All rights reserved.