Codelocks CL1005

Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

نموذج: CL1005

مقدمة

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Codelocks CL1005 Standard Vertical Cabinet Lock

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

الإعداد والتثبيت

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

محتويات الحزمة:

  • CL1005 Lock Body
  • براغي المتصاعدة
  • قالب التثبيت
  • 2 بطاريات AAA
  • Cam (pre-installed or separate)

خطوات التثبيت:

  1. جهز الباب: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
  2. أدخل جسم القفل: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
  3. Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
  4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
  5. تركيب البطاريات: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
  6. عملية الاختبار: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

تعليمات التشغيل

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Opening the Lock:

  1. أدخل رمز المستخدم المكون من 4 إلى 6 أرقام.
  2. The lock will emit a confirmation tone and the LED will flash green.
  3. Turn the knob to the unlocked position.
  4. افتح باب الخزانة.

الإغلاق والقفل:

  1. أغلق باب الخزانة.
  2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

صيانة

استبدال البطارية:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

  1. Open the battery compartment cover on the back of the lock.
  2. قم بإزالة البطاريات القديمة.
  3. قم بإدخال بطاريتين جديدتين من نوع AAA، مع التأكد من القطبية الصحيحة.
  4. أغلق غطاء حجرة البطارية جيدًا.

تنظيف:

قم بتنظيف الجزء الخارجي من القفل باستخدام قطعة قماش ناعمة.amp تجنب استخدام المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية، لأنها قد تُلحق الضرر بالطبقة النهائية والمكونات الإلكترونية.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
Lock does not respond to code entry.
  • تم إدخال رمز غير صحيح.
  • البطاريات الميتة أو المنخفضة.
  • عطل في لوحة المفاتيح.
  • Ensure the correct code is entered.
  • Replace batteries (refer to Maintenance section).
  • Use 9V battery override if necessary.
  • اتصل بدعم العملاء إذا استمرت المشكلة.
Lock opens but does not stay locked.
  • Cam not properly aligned or installed.
  • Obstruction preventing cam engagement.
  • Check cam installation and alignment.
  • Ensure no objects are blocking the cam's movement.
Lock emits warning beeps/flashes.انخفاض طاقة البطارية.Replace the 2 x AAA batteries immediately.

تحديد

  • نموذج: سي إل 1005
  • ماركة: أقفال برمز
  • نوع القفل: Keypad, Keyless
  • ميزة خاصة: الدخول بدون مفتاح
  • قوة: 2 × بطاريات AAA (مرفقة)
  • عمر البطارية: Approximately 15,000 openings
  • سمك الباب: حتى 1/2 بوصة (12.7 مم)
  • حجم البرميل: 5/8 inch (15.8 mm) threaded
  • الأبعاد (الطول × العرض × الارتفاع): 6 × 2.5 × 1.5 بوصة (152 × 63.5 × 38.1 مم)
  • وزن: 16 أوقية (0.45 كجم)
  • ينهي: Silver Grey (Painted)
  • طريقة التحكم: يلمس
  • أسلوب: حديث

الضمان والدعم

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webالموقع أو تواصل مع قسم خدمة العملاء. احتفظ بإيصال الشراء كإثبات للشراء.

Codelocks Official Webموقع: www.codelocks.com

© 2023 Codelocks. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.