Tamiya 1/32 Mini 4WD PRO No.21 Bison Magnum Instruction Manual

1. المقدمة

شكرا لك على الشراءasing the Tamiya 1/32 Mini 4WD PRO No.21 Bison Magnum model kit. This kit allows you to assemble a high-performance four-wheel drive racer designed for enjoyable racing. This manual provides essential information for the assembly, setup, operation, and maintenance of your Mini 4WD PRO model.

2. معلومات السلامة

• This product is a plastic model kit and requires assembly.
• احفظ الأجزاء الصغيرة بعيداً عن متناول الأطفال الصغار لتجنب خطر الاختناق.
• Use appropriate tools as instructed and handle them with care to avoid injury.
• Ensure batteries are inserted with correct polarity. Do not mix old and new batteries or different types of batteries.
• لا تتخلص من البطاريات بإلقائها في النار.
• No specific safety warnings apply beyond general model kit handling and battery usage guidelines.

3. تعليمات التجميع

This kit requires assembly. Please refer to the detailed instruction sheet included in the package for step-by-step guidance. The following provides an overview of key assembly features:

• Chassis Structure: The chassis is composed of three main parts: the nose, center, and tail units. These units can be attached and detached with a single touch, allowing for quick and wide-ranging setting changes.
• وضع المحرك: A double shaft motor, with shafts extending from both ends, is mounted in the center of the chassis. This design achieves high drive efficiency.
• تصميم الجسم: The Bison Magnum features a curved body design, reminiscent of the Magnum Saber, with structural material-like shapes at the front of the cockpit and a distinctive boomerang-shaped rear wing. The nose unit used is N-02.
• الأدوات المطلوبة: Separate tools such as nippers, screwdrivers, and hobby knives are required for assembly.

Image: The Tamiya 1/32 Mini 4WD PRO No.21 Bison Magnum model kit, fully assembled and painted. The model measures 152mm in length.

4. الإعداد

• تركيب البطارية: Two AA batteries are required (sold separately). Install them by distributing them to the left and right of the motor. This low-center-of-gravity design contributes to stable high-speed running.
• Wheel and Tire Attachment: Securely attach the wheels and tires according to the assembly instructions.
• Roller Setup: Ensure all rollers are properly installed and move freely to optimize cornering performance.

5. تعليمات التشغيل

Once assembled and set up, your Tamiya Mini 4WD PRO Bison Magnum is ready for operation.

• تشغيل الطاقة: Ensure the batteries are correctly installed and switch the power to the 'ON' position.
• تتبع الاستخدام: Place the Mini 4WD on a designated Mini 4WD race track. The double shaft motor and low-center-of-gravity design provide stable and efficient high-speed performance.
• التعديلات: The detachable chassis parts (nose, center, tail) allow for quick adjustments to adapt to different track layouts and conditions. Experiment with various settings to optimize performance.

6. الصيانة

Regular maintenance will ensure the longevity and optimal performance of your Mini 4WD PRO model.

• تنظيف: After each use, clean the chassis, wheels, and motor area to remove dust and debris. Use a soft brush or cloth.
• فحص المعدات: Periodically check the gears for wear and tear. Replace any damaged gears to maintain smooth power transmission.
• العناية بالمحرك: Keep the motor free from obstructions. If performance degrades, consider replacing the motor.
• إزالة البطارية: Always remove batteries when the model is not in use for extended periods to prevent leakage.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Mini 4WD PRO, refer to the following common troubleshooting steps:

• النموذج لا يتحرك:
  • تأكد من تركيب البطاريات وشحنها بشكل صحيح.
  • تأكد من أن مفتاح الطاقة في وضع التشغيل.
  • Verify that the motor is properly connected and functioning.
  • Inspect gears for any obstructions or damage.
• Model runs slowly or inconsistently:
  • استبدل البطاريات القديمة بأخرى جديدة.
  • Clean any dirt or dust from the moving parts, especially around the axles and gears.
  • Check for excessive friction in the drivetrain or wheels.
• Model veers off track:
  • Ensure all wheels are securely attached and straight.
  • Check the rollers for proper rotation and alignment.
  • Inspect the chassis for any damage or warping.

8. المواصفات

9. الضمان والدعم

For any questions regarding assembly, missing parts, or product defects, please contact Tamiya customer support. Please retain your proof of purchase for warranty claims, if applicable. Specific warranty terms may vary by region.