Viper 479V Responder Remote Instruction Manual

1. انتهى المنتجview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

المميزات الرئيسية:

• الاتصال في الاتجاهين: Provides visual and audible confirmation when commands are sent successfully.
• نطاق ممتد: Operates with up to 1/2 mile range.
• شاشة LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. توافق النظام

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• فايبر 542V
• فايبر 434V
• فايبر 554V
• فايبر 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. تجهيز السيارة:
   • Open the driver's side door.
   • أدخل المفتاح في الإشعال.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. أدخل وضع البرمجة:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and يمسك it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and يمسك it. The car's siren will chirp once.
4. Program Remote: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. الخروج من وضع البرمجة: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. اختبار عن بعد: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Operating the Remote

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

الوظائف الأساسية:

• قفل: Press the lock button to arm your vehicle's security system and lock the doors.
• فتح: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• البدء عن بعد: Press the remote start button to remotely start your vehicle (if equipped and configured).
• وظائف مساعدة: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. الصيانة

استبدال البطارية:

The Viper 479V remote requires بطاريتين AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. حدد مكان غطاء حجرة البطارية على الجزء الخلفي من جهاز التحكم عن بعد.
2. قم بتحريك الغطاء أو فك مشبكه بحرص لفتح الحجرة.
3. قم بإزالة بطاريات AAA القديمة.
4. أدخل بطاريتين جديدتين من نوع AAA، مع التأكد من صحة القطبية (+/-).
5. أعد تركيب غطاء حجرة البطارية بشكل آمن.

العناية والتعامل:

• تجنب التعرض للماء: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• الحماية من القطرات: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• نظف بلطف: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• درجات الحرارة القصوى: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. استكشاف الأخطاء وإصلاحها

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• جهاز التحكم عن بعد لا يستجيب:
  • فحص واستبدال بطاريات AAA.
  • تأكد من أنك ضمن نطاق تشغيل المركبة.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• نطاق مخفض:
  • استبدال البطاريات.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• مشاكل شاشة LCD:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• الأزرار لا تعمل:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. المواصفات

8. معلومات الضمان

The Viper 479V Responder Remote comes with a ضمان المصنع لمدة عاميغطي هذا الضمان عيوب المواد والتصنيع في ظل الاستخدام العادي. يُرجى الاحتفاظ بإيصال الشراء للمطالبة بالضمان.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. الدعم

للحصول على مزيد من المساعدة أو الدعم الفني أو الاستفسارات غير المذكورة في هذا الدليل، يرجى الرجوع إلى الموارد التالية:

• Viper Official Webموقع: Visit the official Viper webموقع إلكتروني لتحديثات المنتجات، والأسئلة الشائعة، ووثائق الدعم الإضافية.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• خدمة العملاء: Refer to your product packaging or the Viper webموقع للحصول على معلومات الاتصال بخدمة العملاء.