1. المقدمة
This manual provides instructions for the safe and effective use of the ALLWAY T15F 1-1/2-Inch Flexible Putty Knife. This tool is designed for various tasks including spackling, scraping, spreading, and stripping. It features a tempered spring steel blade and a durable metal handle, engineered for flexibility and resilience.

Figure 1: The ALLWAY T15F 1-1/2-Inch Flexible Putty Knife, showcasing its tempered steel blade and metal handle.
2. معلومات السلامة
يرجى مراعاة احتياطات السلامة التالية دائمًا عند استخدام هذه الأداة:
- ارتداء حماية العين: Always wear safety glasses or goggles to protect your eyes from debris.
- إبقاء الأيدي نظيفة: Ensure hands are clear of the blade's path during use.
- القبضة الصحيحة: Maintain a firm grip on the handle to prevent accidental slips.
- تخزين آمن: Store the putty knife in a secure location, out of reach of children and pets.
- فحص قبل الاستخدام: Before each use, inspect the blade and handle for any damage. Do not use if the tool is damaged.
3. الإعداد
The ALLWAY T15F Putty Knife requires minimal setup. Upon receiving the tool:
- أفرغ: Carefully remove the putty knife from its packaging.
- فحص: Check the blade and handle for any manufacturing defects or shipping damage.
- ينظف: It is recommended to clean the blade with a damp cloth to remove any residue from packaging or manufacturing before first use. Note that some adhesive residue from product labels may require additional cleaning (see Troubleshooting section).
4. تعليمات التشغيل
The ALLWAY T15F Flexible Putty Knife is versatile for various applications:
4.1. Applying and Spreading Materials
Use the flexible blade to apply and spread joint compound, plaster, or putty smoothly over surfaces. The flexibility allows for contouring to uneven areas and achieving a fine finish.
- Load a small amount of material onto one side of the blade.
- Hold the knife at a shallow angle to the surface.
- Apply even pressure and spread the material in a consistent motion.
4.2. Scraping and Removing Excess Material
The tempered steel blade is effective for scraping off old paint, wallpaper, or excess dried materials.
- Hold the knife at a steeper angle (e.g., 30-45 degrees) to the surface.
- Apply firm, consistent pressure to lift and remove unwanted material.
- For stubborn materials, consider using a softening agent if appropriate for the surface.
4.3. التجريد
The robust construction makes it suitable for stripping applications, such as removing caulk or sealants.
- Carefully insert the blade under the material to be stripped.
- Apply gentle leverage to lift and peel away the material.
- Work slowly and deliberately to avoid damaging the underlying surface.

Figure 2: The ALLWAY T15F 1-1/2-Inch Flexible Putty Knife, demonstrating its compact design suitable for various tasks.
5. الصيانة
Proper maintenance ensures the longevity and performance of your putty knife:
- تنظيف: Immediately after each use, clean the blade thoroughly to remove any residual materials. Use warm water and a stiff brush or sponge. For stubborn materials, a solvent appropriate for the material (e.g., mineral spirits for oil-based paint) may be used, ensuring proper ventilation.
- تجفيف: Dry the blade completely after cleaning to prevent rust.
- تخزين: Store the putty knife in a dry place. Consider using a blade guard or storing it in a toolbox to protect the blade edge and prevent accidental injury.
6. استكشاف الأخطاء وإصلاحها
This section addresses common concerns:
- Adhesive Residue on Blade: If a sticky residue remains on the blade from product labels, it can be removed using a commercial adhesive remover, rubbing alcohol, or mineral spirits. Apply the cleaner to a cloth and rub the affected area until the residue is gone. Clean and dry the blade afterward.
- شفرة غير لامعة: While designed for durability, the blade may dull over time with heavy use. For most applications, a slightly dulled edge is acceptable. If a sharper edge is desired for specific tasks, the blade can be carefully sharpened using a fine-grit sharpening stone or file, maintaining the original bevel.
7. المواصفات
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | ت15 اف |
| عرض الشفرة | 1-1/2 بوصة |
| مادة الشفرة | Tempered Spring Steel |
| مادة المقبض | معدن |
| أبعاد المنتج | Approximately 1.5"L x 1.5"W (blade dimensions) |
| وزن العنصر | حوالي 2.24 أونصات (0.14 رطل) |
| الاستخدامات الموصى بها | Applying and spreading joint compound, plaster, or putty; Scraping and removing excess material; Repair and maintenance tasks |
| رمز المنتج الموحد | 037064080013 |
8. معلومات الضمان
The ALLWAY T15F Flexible Putty Knife comes with a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact ALLWAY customer support directly.
9. الدعم
For further assistance, questions, or to report any issues with your ALLWAY T15F Flexible Putty Knife, please contact ALLWAY customer support. You can typically find contact information on the product packaging or on the official ALLWAY webموقع.
يمكنك أيضًا زيارة ALLWAY Store on Amazon لمزيد من المعلومات عن المنتج.


